Air dryer

The heatless regeneration adsorption dryer uses the unique capillary action of the desiccant material itself to absorb the moisture in the air. attached).
The dehumidification principle of the micro-heat regenerative adsorption dryer is basically the same as that of the heatless dryer. The difference is that the low-pressure drying air used for regeneration is first heated and then enters the regeneration tower to dehumidify the desiccant, and a heating device is added in the structure. The advantage of the micro-heat regeneration adsorption dryer in the program is that the energy waste is less, only 6%. In addition, the long switching cycle reduces the wear and tear of the parts, and improves the reliability of the equipment. The heatless adsorption dryer consumes a lot of air, and the microthermal adsorption dryer has a heater, so it consumes a lot of electricity.

Features of air dryer:

1. The large adsorbent bed with a contact time of 6.25 seconds ensures that the saturated air entering the dryer is dried to the required dew point and compensates for the natural aging of the adsorbent layer;
2. The large-scale stainless steel airflow diffuser with reliable structure ensures that the airflow passes through the adsorbent layer evenly and eliminates the channeling phenomenon;
3. Appropriate tower size and convection mode of upstream drying and downstream regeneration are beneficial to reduce the amount of regeneration gas, and avoid the fluidization of the adsorbent and the pollution of the adsorbent layer;
4. The slow and complete charging procedure and time-delay switching design eliminates downstream airflow pulsation and prevents adsorbent movement and adsorbent abrasion;
5. Independent filling port and discharge port, easy to replace the adsorbent;
6. The tower body is manufactured in accordance with the national standard for pressure vessels.

Dimensions Note: G is screw connection, screw standard GB/T7306; DN is flange connection, flange standard HG20592. The specific parameters and specifications are subject to the actual machine; special standards can be customized.