Tire wire drawing machine

The tire wire drawing machine is a device that directly pulls out the steel wire of the entire tire, and pulls the steel wire from the tire bead so that the tire can be shredded directly by the shredder in the next procedure. It can protect the shredder tool, prolong the service life of the tool, and improve the working efficiency of the shredder.

The wire drawing machine is driven by the motor to drive the hydraulic system and the oil cylinder, the hook is connected to the cylinder rod, and the movement of the oil pump and the oil cylinder causes the hook to move back and forth. Put the tire on the pull hole, and the pull hook extends out of the pull hole to hook the inner wire of the tire and then start the button. Due to the strong pulling force of the oil cylinder, the steel wire is pulled out as a whole, and the rubber is torn at the sidewall due to the action of the pull hole, so as to achieve the purpose of separating the steel wire.

Quran Tire wire drawing machine

This machine is suitable for the waste tire recycling industry. It can completely pull out the large strands of steel wires on both sides of the tire, so as to separate the main steel wire from the tire, which is the main step in the recycling of waste tires. The strength of the steel wires on both sides of the tire is high, making it difficult to break and the blade is easily damaged. The steel wires on both sides of the tire are first pulled out and then broken, which reduces the damage to the blade. Pushing and pulling, steel wire clamping and cutting steel wire are all electronically controlled by hydraulic system, the operation is extremely simple and practical, and the steel wire in the tire under 1.2 meters can be pulled out.