Tire sidewall cutter

The machine has two cylinders. The main cylinder is responsible for fixingthe tire on the runner, so that the tire is not be move during the cuttingprocess, and the secondary cylinder is responsible for the cutters　on both sides. First place the tire on the tire wheel and start the power supply. The main cylinder will move the tire wheel down to fix it on the tire runner. At the　same time, the secondary cylinder controls the cutter to slowly cut into the tire. After　the tire rotates for one week, the bead is also cut. Remove the bead on both sides of the tire at the same time,no need manual flipping. Fast cutting, complete bead cutting in 5 seconds. Distribution box control, simple and safe operation. "Large output, can process 300-500 tires per hour.

Quran Tire sidewall cutter

This is a double-sided cutting machine for tires. The characterized is bead on　both sides of the tire.And can be cut off at one time. It is mainly used for　the processing of used tires, especially for the bead cutting of trolley tires　(600-800mm), which greatly improves the fficiency of tire ring cutting